How To: Replace the LCD screen on a BlackBerry Storm 9530/9500

Replace the LCD screen on a BlackBerry Storm 9530/9500

In this how to video, you will learn how to replace the screen on your Blackberry Storm 9530 and 9500. First, remove the battery and sim card from the phone. Lift off the covering over the camera lens with a pry tool. Gently do this, as it has glue. Next, turn the phone over and do the same for the bottom section of the phone. Using a torx screw driver, remove the screws underneath the section you just removed. Turn the phone over and remove the four screws shown. Use the pry tool and run it along the front and back cover of the phone. There are three on each side of the phone. Remove it, but remember that it is still connected to the phone with a cable. It should pop off by itself. If it does not, lift it using the tool. Now turn it over and remove the back cover. Using the pry tool, lift the connect shown to disconnect the screen. Now the screen can be removed and replaced.

1 Comment

VERY HELPFUL & EASIER THAN I THOUGHT IT WOULD BE.....WHILE VIEWING THE VIDEO I DETERMINED THAT MY BATTERY IS SWOLLEN WHICH PUTS PRESSURE UNDER THE TOUCH SCREEN . IT ALL WORKS FINE WITH THE BATTERY COVER REMOVED. I SHOULD HAVE CHECKED THAT BEFORE I ORDERED A NEW TOUCH SCREEN ASSY. OH WELL. THANKS!

Share Your Thoughts

  • Hot
  • Latest